|
This hoof trimmer was designed to make trimming hooves as
smooth and easy as possible. This trimmer can cut fast but does
not pull you into the cut and is not overly aggressive. Because of the
design of the tool you are in control of how fast or how slow you want
to cut. When it’s time to finish the hoof you can put that nice
smooth finish on as well.
The cutter is 4” in diameter and has 4 carbide inserts that can
be indexed 4 times. It is threaded to mount directly to any 4” or 4 ½”
angle grinder that has a 5/8” -11 thread. It will not slip and is
always in balance with all inserts in place.
The trimmer comes with 4 square carbide inserts, 4 flat head
screws and 1 hex T handle wrench.
- Caution-- Use light oil on the screws to
protect screws from rusting and galling.
Always use caution to make sure the screws are started straight
and not cross threaded when you rotate or replace the inserts.
THIS IS A CUTTING TOOL AND
YOU ARE RESPONSIBLE FOR WHAT IT CUTS!
Always Keep Hands
and Body Clear Of the Cutters!
|